The M65T Twin Engine Road Sweeper has been designed specifically for the UK and European Markets and is capable of being mounted onto virtually any internationally available 12 to 18 tonne GVW truck chassis. Incorporating all the benefits associated with Scarab equipment, the rugged construction and a carefully selected range of options ensure the M65T delivers outstanding performance in municipal, urban or heavy duty contracting work. The M65T can be supplied with a wide range of options to suit specific markets and cen supplied as a complete machine mounted on a chassis from the Scarab factory or for specific markets can be supplied as a Skid Unit for local mounting in the country of destination. Whatever the application, wherever the location, the M65T street sweeper is a cost effective solution for the demanding operator.

8.4m3 Capacity Standard twin-discharge system comes with every Stock Sweeper. Should the auxiliary engine PTO (power take-off) fail, our equipment has its own independent electrical discharge system for additional use, if needed. Body, Cowl and Rear Door – Stainless Steel The body, cowl, and rear door are fully built with corrosion and abrasion-resistant stainless steel. 2100L of Clean Water 1600L as standard, with optional 250L – 4000L additional water tanks available. *Chassis dependant. Double-Strength Subframe and Tipping Hinges We know our sweepers have to be robust, and critical to the stability of the vehicle is its subframe and tipping hinges. Twice the typical steel is used, to ensure maximum stability on uneven ground.

Side Brush The side brush equipment is of a heavy-duty construction, and has brush speed control with ‘power-down’ ground pressure regulation fitted as standard. The ‘power-down’ feature enables the operator to scrub the road harder to remove run-in and compacted dirt. The side brushes have fully adjustable sideways positioning and simultaneous side brush rotation operation to ensure you sweep efficiently, even in awkward situations. The S8400 has an impressive overall sweep width of 3650mm and allows the S8400 to clean many roads in a single pass. Wide Sweep Brush The 400mm-diameter by 1300mm-long wide sweep brush has a fully adjustable ground pressure regulation system. The system is set on 4 regulators (2 for left hand sweeping and 2 for right hand sweeping). This enables the operator to switch from left to right-hand sweeping operations without the need to leave the cab of the vehicle and readjust the brush. Fitted with ‘power-down’ the wide sweep brushes performs efficiently on run-in and stubborn compacted dirt. The wide sweep brush canopy and guards are robustly constructed from 4mm powder-primed and powder coated mild steel ensuring maximum life expectancy. Opposed Sweep Function With one-touch operation, the wide sweep brush can be switched to push material away from the suction nozzle. This simple innovation improved road planing productivity by up to 60%.

Dust Suppression System The self-priming, low-pressure water dust suppression pump ensures dust-free collection of all swept material. Water can be injected directly into the suction box, towards the side brush, and across the front of the vehicle. The dust suppression system delivers 35 litres/min at 3.5 bar (50 psi). High Pressure Wash For more arduous cleaning the high pressure water system incorporates a hand lance with 15 metres of hose, suction box spray bars, and wide sweep brush spray bar all delivering water at up to 30 litres/min at 150 bar (2,200 psi) precisely where it’s needed.

Nozzle Suction The suction boxes are constructed of cast aluminium with a 4mm moulded vulcanized wear-resistant rubber lining. Each of the two boxes can be raised or lowered, and be tilted backwards at the flick of a switch, to make the pick-up of larger material effortless. Overhead Suction The overhead wander hose has a 4.2 metre reach that can be used for many operations; from cleaning catch-pits and road gullies, to picking litter and leaf collection. To ensure the wander hose does not become too heavy in operation, it is fitted with a counter- balancing spring system. The overhead wanderhose can also be hydraulically operated. Screen Shakers ‘Healthy Airflow’ Rear mesh screen shakers are another standard fitment. They enable the operator to clean the rear screens every time the rear door is opened, both screens are lowered automatically making thorough washing of the screens an easy task. This is essential to maximise the sweepers suction and will minimise unnecessary engine and equipment wear. The screens can also be operated with the rear door closed using the ‘quick clean’ function. This is done by unclipping the handle and pulling down sharply on the rear cables, to shake the screens free from dirt and leaf build-up.